Icinga

13.11. switch.cfg

###############################################################################
# SWITCH.CFG - SAMPLE CONFIG FILE FOR MONITORING A SWITCH
#
# NOTES: This config file assumes that you are using the sample configuration
#    files that get installed with the Icinga quickstart guide.
#
###############################################################################




###############################################################################
###############################################################################
#
# HOST DEFINITIONS
#
###############################################################################
###############################################################################

# Define the switch that we'll be monitoring

define host{
   use      generic-switch      ; Inherit default values from a template
   host_name   linksys-srw224p      ; The name we're giving to this switch
   alias      Linksys SRW224P Switch   ; A longer name associated with the switch
   address      192.168.1.253      ; IP address of the switch
   hostgroups   switches      ; Host groups this switch is associated with
   }




###############################################################################
###############################################################################
#
# HOST GROUP DEFINITIONS
#
###############################################################################
###############################################################################

# Create a new hostgroup for switches

define hostgroup{
   hostgroup_name   switches      ; The name of the hostgroup
   alias      Network Switches   ; Long name of the group
   }




###############################################################################
###############################################################################
#
# SERVICE DEFINITIONS
#
###############################################################################
###############################################################################

# Create a service to PING to switch

define service{
   use         generic-service   ; Inherit values from a template
   host_name      linksys-srw224p   ; The name of the host the service is associated with
   service_description   PING      ; The service description
   check_command      check_ping!200.0,20%!600.0,60%   ; The command used to monitor the service
   normal_check_interval   5      ; Check the service every 5 minutes under normal conditions
   retry_check_interval   1      ; Re-check the service every minute until its final/hard state is determined
   }


# Monitor uptime via SNMP

define service{
   use         generic-service   ; Inherit values from a template
   host_name      linksys-srw224p
   service_description   Uptime   
   check_command      check_snmp!-C public -o sysUpTime.0
   }



# Monitor Port 1 status via SNMP

define service{
   use         generic-service   ; Inherit values from a template
   host_name      linksys-srw224p
   service_description   Port 1 Link Status
   check_command      check_snmp!-C public -o ifOperStatus.1 -r 1 -m RFC1213-MIB
   }



# Monitor bandwidth via MRTG logs

define service{
   use         generic-service   ; Inherit values from a template
   host_name      linksys-srw224p
   service_description   Port 1 Bandwidth Usage
   check_command      check_local_mrtgtraf!/var/lib/mrtg/192.168.1.253_1.log!AVG!1000000,1000000!5000000,5000000!10
   }